Matson has been an industry leader since 1947

Founded in Sydney in 1947 and acquired by Tridon in 2015, Matson is a proudly Australian family owned brand.
From humble beginnings manufacturing battery cables and jumper leads, Tridon says Matson became world leaders in battery terminal manufacture, eventually branching out into a complete range of specialty battery accessory products.
Today, Matson is a market leader in battery testing technology, jump starting (including both lead acid and lithium technologies), as well as battery charging, power inverters and battery monitoring equipment, supplying local and international industrial and automotive markets.
Highlights of the Matson charging range include the following products.
Tridon says the Matson MA61224 is the ultimate all-round workshop battery charging tool.
It is capable of charging 6V, 12V and 24V battery systems, all common battery chemistries including AGM, Gel, Calcium and Lithium, while offering full control over charging current up to 20 amps.
The unit also features a power supply mode for both 12V and 24V applications. This advanced multistage charger is easy to set up and use, with all settings and battery status info displayed by clear LED interface.
With a full suite of safety features and advanced charging technology, Tridon says the MA61224 is the do-it-all solution for your charging needs.
The AEE400 Battery Rescue Charger is a unique offering in the battery charging space that can charge 6V and 12V batteries that others can’t, explains Tridon.
Almost all battery chargers have a minimum start voltage that requires a battery to be above a certain voltage or the charger will not turn on and start charging.
The frustrating result of this can mean someone has a flat battery and a charger that won’t charge it.
Tridon says the Matson Battery Rescue charger was created to solve this problem. After checking the connections are correct, the user is able to initiate charging on batteries as low as zero volts. It is compatible with all common battery chemistries, including lithium.
The AE12000E Workshop Battery Charger and Power Supply is the jewel in the crown of the Matson charger range.
Designed as the workshop workhorse, it can deliver up to 100 amp charging for 12 volt batteries in all common battery chemistries, but with precise control for the user to be able to select as low as two amps if required for small batteries.
Tridon says it will also deliver an impressive 120 continuous amps in power supply mode to allow for the power hungry demands of computer flashing and reprogramming in modern vehicles, while allowing the user to define the output voltage in 0.1V increments.
Showroom mode allows the charger to provide up to 50 amps of power to a vehicle on display, in silence and with the interface locked so it can’t be tampered with while quietly doing its job powering lights and on-board vehicle electronics.
With all of this backed by a long warranty and local device support, Tridon says the AE12000E is a reliable modern workshop companion.

For more information, visit www.tridon.com.au