NEW FROM AEROFLOW

A range of new products have been introduced to the market by Aeroflow

Since 2010, Aeroflow Performance Products has grown to design and manufacture close to 13,000 quality products. Amongst the latest releases are the following products.

Harmonic Balancer Bolts
The Aeroflow Harmonic Balancer Bolts are manufactured from aircraft quality 8740 high tensile strength chromoly steel and cold-forged to ensure molecular integrity within the stud.
This means they are rated up to 190,000 psi, which Aeroflow says makes them stronger than Grade 8 and OEM fasteners.
They feature a tall 12pt hex head to prevent socket slippage while rotating the engine during assembly or routine service inspections, and an extra thick ground washer is provided to allow for a more accurate, uniform torque.

Holden 253-304-308 Timing Cover and Water Pump Bolt Kit
When installing a new timing cover and water pump, it is recommended to upgrade your mounting bolts.
The Aeroflow timing cover and water pump bolts are made from chrome moly 8740 for strength and they are coated in a black oxide finish for protection and long-lasting durability.
Each bolt features a compact 12-point head which is ideal for use where space is minimal on most aftermarket water pumps and timing covers compared to the factory bolts with a larger head.
Each set includes thick flat washers for optimum clamping pressures to ensure a sure seal.

Brake Booster Extension Rod and Clevis
Aeroflow Performance says its brake booster extension kits are the perfect match to suit its brake booster range and allow for an easier installation into many vehicle applications.
The extension rod and clevis kit help obtain proper height and travel for the vehicle’s brake pedal for correct operation of the brake booster.
The zinc coated steel extension rod is 4-3/8” (92mm) long with one male and one female end.
This adjustable rod is meant to be cut to length to fit the brake booster rod to brake pedal.
The clevis pivot pin and centre holes in the pedal rod extensions are 3/8” (9.52mm) diameter and all are threaded 3/8”-24.
The short pedal rod extension is 1-1/2” (38mm) long, the medium pedal rod extension is 2-1/2” (63mm) long and the clevis is 2-1/2” (63mm) long.

Oil Pump Drive Shaft kit to suit Holden V8
Aeroflow Performance says it is easy to overlook the small details, and for engine builders focused on the larger components, the small parts can often be forgotten until the final stages of engine assembly.
Aeroflow says this is why it has added these special components for the Holden V8 engine oil pump to its range.
It states that these hard to come by components are crucial when properly assembling your 253, 304 or 308 Holden V8.
This kit includes a replacement oil pump drive shaft, replacement oil pump drive gear, one brass drive shaft bush, and one gear drive pin.

Ford Nine Inch Brake Kit
This upgraded disc rear brake kit with internal handbrake shoes from Aeroflow Performance is designed specifically for the Ford nine-inch differential.
Aeroflow Performance says it is simple to install and comes with detailed instructions.
It is said to provide big stopping power compared to original factory drum brakes found on most Ford differentials.
Aeroflow Performance says the aftermarket disc brakes are superior to original drums and notes that this kit comes with large 12.19” diameter, 3/4” thick vented rotors that are drilled and slotted with three bolt circle patterns included (five x 4.50/4.75/5.00).
This kit also features a hidden internal handbrake system, providing a clean installation with superior static holding power for parking, and mounting plate assemblies to fit Ford nine-inch axle housings with New Big Ford Bearing (2.50” axle offset).
The brake callipers are an off-road use low profile forged billet four piston calliper with bleed nipples on the top and bottom of the calliper.
Also included are high friction brake pads to provide optimised and balanced braking for all types of vehicles.

For more information, visit www.aeroflowperformance.com