Davies Craig offers a wide range of Oil Coolers

Engine and Automatic Transmission Oil Coolers have developed into very sophisticated vehicle aftermarket accessories with a broad range available from Davies Craig to suit your particular vehicle.
Many engine and transmission failures have been caused either by overheating and/or neglect and therefore can prove expensive.
A pleasant family holiday towing a caravan can quickly turn into a very expensive one if the proper engine and transmission cooling precautions are not taken.
Current climatic and heavier road traffic conditions; increased stop-start traffic flows; and higher ambient temperatures are further compounded with the heavier pay loads we strap onto vehicles, so engines and transmissions need to be given as much relief as possible.
Davies Craig says some of the Original Equipment installed in both these areas is barely sufficient.
Many of the modern engines, in particular automatic transmissions, are sealed – so checking the fluid levels can be problematic.
Further, if both are not maintained and/or kept in sustainable condition, serious problems can develop, especially under high torque towing applications.
Some vehicles have a built-in factory transmission oil cooler, but Davies Craig says if you intend to use your vehicle for extensive towing with either a trailer or caravan, or to travel in hilly and/or sandy terrain, extra transmission and engine oil cooling becomes essential.
For example, it says farmers and those travelling on country/outback roads operating in tough conditions would benefit from auxiliary transmission and/or engine oil cooler kits installed on their vehicles.
While you are able to check your engine oil level and in some cases your transmission oil level, you are unable to conveniently check the operating temperature of your transmission at any time.
Davies Craig says that in many cases, your transmission may be operating at temperatures well above normal at any given time.
Davies Craig offers a wide range of 20mm, 32mm and 50mm Universal Oil Coolers which it says are an ideal accessory for any engine and/or transmission in extreme towing, off-roading or racing applications.
An effective way to keep the engine and/or the transmission oil at its optimum operating temperature, these stacked plate cores offer high heat transfer rates, allowing for faster dissipation of heat.
The stacked plate cores are supplied with AN10 ORB female fittings for quicker installation.
You can further enhance your cooling by mounting a fully reversible Davies Craig eight-inch and ten-inch Thermatic Electric Fans, that provides greater flexibility with your mounting options.
Davies Craig further recommends the installation of a Davies Craig Digital Thermatic Fan Switch to ensure your Engine and/or Transmission Oil Cooler Combo performs at its optimum in all environmental conditions.
Davies Craig says all of its engine and transmission oil coolers are 100 percent pressure tested to ensure the reliability and durability of the product, and are covered by a written three-year warranty.
The Ultra-Cool and Hydra-Cool model Kits and some engine oil cooler cores are supplied with the necessary accessories and installation instructions.

For more information, visit www.daviescraig.com.au