With the ANBI Switch negative battery terminal isolator

The ANBI Battery Switch eliminates drainage of stored power by isolating the battery. Digital Pulse Systems says installation is quick and easy and can be completed in less than 15 minutes.
Designed and manufactured in Australia to international automotive specifications, the ANBI Switch is said to be cost-effective, robust, easy to fit and perfect for even the most adventurous off-roader.
From the outset the goal was to develop an engagement system that would provide enough contact surface area to deliver the conductivity required for the battery to be fully operational when engaged and ensure that the battery was completely isolated when disengaged.
Digital Pulse Systems says that while this might sound like a simple task, many battery isolator switches fail to deliver on either one, or both, of these critical areas.
The ANBI Switch’s patented design incorporates a sliding bronze panel
to overlap a fixed bronze panel within the switch housing by 3mm, to
affect conductivity for the battery to be fully operational. This provides for 57.06 sq mm of contact.
To isolate the battery, the sliding panel is withdrawn to a 6mm stop. This provides a 3mm gap between the two contacts, thus eliminating contact that provides the isolation.
Prior to launch, the ANBI Switch was subjected to a rigorous testing regime to ensure it was fit for purpose, including Accelerated Life Tests, Resistivity Testing, Vibration Testing and testing required for International Automotive Quality Standards TS16949 and ISO14001, with Digital Pulse Systems stating the ANBI Switch exceeded the criteria for both International Standards and secured compliance.

Based on the test results and to protect its intellectual property, the team at Digital Pulse Systems applied for and secured Patents in Australia, India, Korea, China, Taiwan, Thailand, the Philippines and the United States of America.
Once the engineering team completed its final evaluation, the ANBI Switch was put into full production in preparation for launch.
Using the same patented engagement system design, the ANBI Switch is available in a range of application specific kits to suit a wide variety of vehicles including Cars, Boats, Trucks, Caravans and Camper Trailers, Jet Skis, Ride-on-mowers, Boats Motorcycles, Japanese Post Batteries and Agricultural equipment.
While most battery isolators require fitting by an auto-electrician due to the requirement of crimping and rewiring during installation, the development of these application specific kits, of which all contain a unique combination of fitting components, allows customers to quickly and easily fit the ANBI Battery Isolator to their vehicle with the most basic of tools.
Digital Pulse Systems says that even for the most inexperienced DIYer, installation will be completed in under 15 minutes.

For more information, visit or call 1800 290 812 for trade enquiries.