Davies Craig asks, “how prepared are you?”

Another sizzling hot Summer is predicted, and you shouldn’t need reminding that sitting in a stinking hot car is not enjoyable and potentially dangerous.
It is time to check your vehicle’s air conditioning (AC) unit, including your electric cooling fan, which is a very important component which is often neglected when assessing the entire air conditioning system.
Re-gassing your AC is one priority, with Australian manufacturer Davies Craig stating this should be carried out annually.
The re-gassing of the AC Condenser is a very specialised job and should only be undertaken by a qualified technician.
A strong Thermatic Electric Fan with a high wind force (CFM Cubic Ft/Min = ft3/min) is an essential component to keeping the AC condenser cool so it can continue to offer fresh cool air efficiently, says Davies Craig.
The stronger electric fan, the cooler the air flow being generated into your driving compartment.
A defective or inefficient electric fan will be detrimental to your entire AC system, so you need an Electric Fan that is fit for purpose and produces the CFM required to produce sufficient air flow through your vehicle’s air conditioning system.
Davies Craig offers a wide range of Thermatic Electric Fans 8”, 9”, 10”, 12”, 14”, 16”; Slimline models 10”, 12” and 14”; High Performance; and now Brushless 12v and 24v models for both engine and air conditioning applications.
Every Thermatic Fan model has been put through exhaustive durability and certified wind tunnel tests to ensure each delivers high, accurate air flow and CFM (ft3/min – Cubic Feet per Minute).
All Davies Craig’s Thermatic Electric Fans offer reverse polarity, allowing each fan to be installed either in front (pusher) and/or behind (puller) the condenser for bi-directional air flow.
Davies Craig advises there are three vital elements which must be carefully considered when one chooses a Thermatic Electric Fan: CFM, current draw, as well as the product’s Warranty.
Davies Craig recently introduced four High-Power and four Brushless Thermatic Electric Fan models to complement the existing Thermatic Electric Fan range.
It asserts that each of these models delivers
40 percent higher CFM than their standard equivalent models and more importantly, have the same mounting profile. Models are available to suit 12V and 24V electrical systems.
The Thermatic Electric Fan range has been manufactured in Australia from strong, heat-resistant 66 Nylon/glass, offering high air flow, low profile, with low current draw.
The Davies Craig website offers 24/7 access to frequently asked questions (FAQs), comprehensive technical information, installation instructions, dimensions, specifications plus a simple fan selection guide.

For more information, visit www.daviescraig.com.au or call 03 9369 1234.