From Bluechem Australia

Bluechem Australia says it has you sorted when it comes to your need for powerful cleaning solutions thanks to its Oxicat and DPF Power Clean products.

Bluechem’s Oxicat
Oxicat is a specially developed high-performance cleaner to sustainably and effectively remove soot and carbon deposits in the entire exhaust tract, especially in the area of the catalyst, the oxygen sensor, the turbocharger and the EGR valve.
This decarbonising technology is a quick and effective preventative cleaner and is suitable for all petrol, diesel and hybrid engines.
With regular use, it provides protection against renewed contamination, increases fuel efficiency, optimises the engine performance and ensures the proper correct function of the catalyst and the oxygen sensors. Thus Oxicat supports compliance with the vehicle’s emission limits.
During driving processes, problems occur in the engine due to catalytic converter and oxygen sensor contamination causing an increase in fuel consumption, poor performance and an increase in harmful exhaust emissions such as carbon monoxide and hydrocarbons which damage the environment.
These problems occur in all vehicles, especially over short distances and for vehicles with exhaust gas recirculation, direct injection and turbochargers, and in areas with poor fuel quality. Often there is a OBD (On Board Diagnostic) error engine light message to the driver.
Bluechem explains that the unique formula of Oxicat does not burn completely during the combustion, but instead remains in the exhaust system.
As such, Oxicat will penetrate the residues and contaminations and dissolve them during ordinary driving.
Bluechem’s Oxicat can be used in all petrol and diesel engines and hybrid vehicles and is recommended for vehicles with excessive exhaust emissions.
The product should be applied regularly (every three months) to the fuel tank and 300ml will treat 60-80 litres of fuel. It is especially suited for city driving cycles.

Oxicat + DPF Power Clean
Bluechem says using its Oxicat and DPF Power Clean products together in diesel applications can result in fast and immediate DPF regeneration results within 20 minutes of idling the engine.
Bluechem’s DPF Power Clean is a high power cleaner engineered as a Diesel Chemical Solution to help the regeneration of Diesel Particulate Filters. The product can be used in all diesel engines and mixed with all diesel fuels and works while the engine is running.
A 375ml can of DPF Power Clean can treat up to 80 litres of diesel fuel.
The simple combination of DPF Power Clean with Oxicat results in DPF regeneration and all of the resulting benefits including reduced soot, increased Exhaust Gas Temperature, reduced emissions and improved fuel economy, says Bluechem.

For more information from Bluechem, visit www.bluechemaustralia.com.au