SUPERPRO UPPER CONTROL ARMS

“The best of both worlds,” says SuperPro

SuperPro says everyone now knows 4×4 Upper Control Arms are a ‘must’ to fix alignment issues after your 4×4 has been lifted above standard height.
With most people fitting bull bars, winches, larger tyres, and rims to their 4×4 along with a lift in their suspension, a product to correct the steering geometry was needed.
Over the years, SuperPro says it has worked hard on establishing a very extensive range of Adjustable Upper Control Arms which are designed to be overtly superior to both OE Arms and the aftermarket competition.
SuperPro Adjustable Upper Control Arms are supplied with camber and caster adjustable ball joints, allowing you to set the perfect alignment for your vehicle to suit the myriad of differing suspension, wheel and tyre set ups available.
They deliver up to three degrees of caster correction and additional camber, allowing
for the optimum alignment settings for a lifted 4WD.
SuperPro says the design of these Control Arms has removed the common issues usually faced with getting the correct alignment and clearance.
The company says it is constantly growing and expanding its range, working hard to release new and improved arms to the market.
To further improve SuperPro’s Upper Control Arm range, SuperPro says its will soon be releasing a more affordable fixed camber and caster correction version.
These arms are reportedly ideally suited to a “conventional” 50mm lift to offer an easy solution to correct alignment via the OE adjustment mechanism on the lower arms.
SuperPro says its 4×4 Upper Control Arms are designed, tested and manufactured to the highest standard, designed to outperform the competition and Original Equipment (OE) parts.
It states they provide the perfect alignment solution, with an upper arm that is built tough using high strength steel.
To further solidify its motto of ‘Engineered to Outperform’, SuperPro says it provided a set of 4×4 adjustable control arms to a third-party engineering company, contracting them to do a third-party analysis outside of its engineering facilities.
SuperPro reports the main underlining note from this company was “in line with the provided information from SuperPro, the FUCA complies with the ADR ruling as stated in the NCOP. It is manufactured to meet or exceed the factory item, with built in features and benefits to suit raised suspension.”

Key features:
• Lifetime Warranty
• Enhances your 4WD’s handling and performance
• Designed to solve alignment issues when you lift your 4WD
• Approved Nationally – VSB 14 Compliant (ADR compliant)
• High quality, form factor welding and assembly
• High grade Steel, for increased strength
• Engineered, tested, and built to the highest standard

For more information, visit www.superpro.com.au