Restore pistons to factory clean

From the moment it starts for the very first time, critical parts of your engine begin building up harmful deposits that are nearly impossible to reverse – until now.
Valvoline says its Restore and Protect is “the first and only engine oil that prevents future deposit formation and restores pistons to factory clean by removing up to 99 percent of engine-killing deposits with continuous use#.
Valvoline states it has revolutionised a way to reset expectations on what an engine oil can do, with its new premium full synthetic engine oil, Valvoline Restore and Protect. The brand explains that while “other synthetics that claim to clean engines simply capture carbon from the combustion process, Restore and Protect does even more.”
As soon as an engine is cranked for the
first time, critical parts of the engine start building up deposits, accelerating aging and reducing its life.
Restore and Protect actively cleans engines, helping return pistons to factory clean conditions with continuous use#.
To achieve this, Restore and Protect features two new breakthrough innovations, Active Clean technology, which actively removes damaging deposits, and Liqui-Shield, which is engineered to protect engine surfaces against future deposit formation.
Why is removing engine deposits important?
Piston and piston ring function are vital for maximum performance. Pistons and piston rings must move freely within tight tolerances and with exacting balance.
Piston rings are designed to float (expand and contract) based on the piston stroke. Proper piston ring function maximises:
• Power by forming the right seal during combustion.
• Protection by optimising the oil layer on cylinder walls.
• Cooling by removing hot oil from pistons and cylinders.
Engine oil prefers clean metal surfaces for the optimal protective oil film to support engine compression and protection.
Fuel, condensation (water), and combustion byproducts create contaminants and break down engine oil.
Deposits and varnish inhibit the formation of the oil film on the metal surface and can prevent anti-wear additives, detergents, and friction modifiers from forming an effective protect layer.
Deposits and varnish also insulate metal surfaces and do not allow heat to be removed effectively, leading to higher engine operating temperatures (which can lead to even more deposits).
With Restore and Protect, when used as directed, it actively restores pistons, decreasing the likelihood of the negative implications fuel, water and combustion by-products create.
The results are clear
Valvoline explains that its Restore and Protect has been tested in the Valvoline Engine Lab against the toughest conditions.
It states all the data showed fewer deposits, less varnish “and results no other engine oil could produce.”
Further, it says Restore and Protect provides 79 percent greater wear protection versus industry standards*.
Valvoline says these results sees Restore and Protect “ultimately transforming the automotive landscape and demonstrating Valvoline’s unwavering dedication to pioneering innovative solutions.”

For more information, visit www.valvolineglobal.com.au

#Up to 99% piston deposit removal when used as directed for four or more consecutive oil changes at standard maintenance intervals. Based on adapted sequence IIIH Testing. Actual results may vary depending on maintenance practices, engine type and/or operating conditions.
*VS. GF-6 qualified oil.